Lock thread hardware accessories manufacturers talk about the use of thread lockers

1. The main rope is selected correctly, and it is strictly forbidden to mix it.

2. In order to install the thread catcher correctly, the roller (protruding part) is on the upper part.

3. Before installation, please pull out the safety screw, and pull out the pawl and roller assembly counterclockwise according to the opening direction of the pawl shaft. After the main rope is installed, install it clockwise in the direction of the opening. Then close the fuse and tighten the fuse screw (not too tight).

4. After the main rope is installed, check the upper and lower elasticity of the thread locker. If the thread lock cannot slide down flexibly, adjust the half-tension spring appropriately. And try to lock 1 to 3 times to ensure the lock function. If any abnormality is found, stop using it; and contact the factory (within one year of use). Unauthorized installation, uninstallation and maintenance are strictly prohibited. wire rope locker

5. After one year of use, 1-2 thread lockers with greater wear should be selected, and an 80kg weight should be used for free fall impact test. If there is no abnormality, this batch can be used for 3 months. After that, tests should be performed every 3 months based on usage. Products that have been tested or that have been hit by heavy objects are strictly prohibited. Objects, suitable for cargo hoisting, to protect the life safety of ground operators and the damage of hoisting workpieces. This product is suitable for the safety protection of the workpiece accidentally falling when the crane is hoisted. It can effectively protect the life safety of ground operators and the damage of the lifted workpiece. The fall arrester can be widely used in petroleum, chemical industry, electric power, construction, communication,